OD 7+ Class laser protective window Protect workers eyes against 1064nm wavelength fiber laser radiation. Protecting effect is much better than market OD5+ laser protective goggles. Further more, protective window is much more friendly when workers are wearing myopia glasses.
High quality push buttons Excellent quality of push buttons with clear label
High speed scanner with dual focus finder High quality scanner makes marking effect much better than normal low quality one, and lower failure rate. Focus finder helps end users who's not that similar with laser marking engraving machine to find laser focus spot easily.LED light helps to check marking effect
LED light helps workers to easily check marking effect and result when door is closed or light in room is too dim. The direction of each led light can be adjust alone which are perfect whenever focus lighting and large area lighting is needed
Solenoid valve Solenoid valve work with relay switch to realize automatic control of motorized clamp.Reserved sheet holes on both side make long sheet marking and engraving available
| Model No. | MLA-M-016 |
| Product name | Enclosed Portable Mini Fiber Laser Marking Machine |
| Laser wavelength | 1064nm |
| Max Laser power | 200W |
| Laser source | Raycus MAX IPG JPT |
| Laser Cutting Area | 70*70mm-100*100mm |
| Laser Marking Cutting Speed | 2000-15000 mm/s |
| Focus Spot Diameter | <600W |
| Power Requirement | 90V-240V 50-60HZ |
| Communication Interface | USB |
| Life-span of fiber laser module | 100,000 hours |
| Optional Device | T-slot, Rotary device, Jack, Laser protective goggles |
| Net Weight | 60 KG |
Fume extractor Fume extractor is a necessary part for enclosed fiber laser marking and engraving machine to suck smoke and small particles from your machine.Limit switch for door Limit switch is installed closed to door. When door is open accidentally,marking process will be stopped immediately.Of course, this function is available to cancel by setting different value in door IO port,while you have to mark with door open.High quality Opex F-theta lens High quality F-theta lens makes laser less loss and more concentrated. That result in thiner laser spot higher power compared with normal brand F-theta lensLED light helps to check marking effect
LED light helps workers to easily check marking effect and result when door is closed or light in room is too dim. The direction of each led light can be adjust alone which are perfect whenever focus lighting and large area lighting is neededAutomatic clamp Automatic clamp can be controlled by Ezcad software, it is good for thin metal sheet laser marking and cutting. Sheet hole left on laser protective windowMaven's MLA-M-016 model laser marking machine has a large viewing window for easy viewing of the marking while working in operation. When the door of the marking machine is closed, the LED light will illuminate to make the inside of the machine more clear when working.High-speed marking.Small volume, light weight.Dust shield to prevent cutting pieces going into machines.Od7+ laser protective windows to protect worker’s eyes, and ensure the visualbility sheet